[Berlin-wireless] RE: Fehlermeldung WRT54GS

Mo Jan 30 06:56:41 CET 2006

Also ich habe es normal per Webinterface aufgezogen. Aber den Fehler hatte ich auch schon in der FFF 1.1
Sonst läuft ja alles bestens.

Robert

--------------------------------------------------------------------------
Hey,

sieht schwer nach WRT54GS-v1.1 unter Freifunk 1.1.2 oder 1.1.3 aus. Ich 
bekomme ziemlich genau dasselben (natuerlich ohne den Squashfs-Ooops). Per 
TFTP Geflaesht? Falls ja - Uebertragungsfehler. MD5 checken. Falls nein - 
Funny. Probier mal eine englische Freifunk - habe selbst ein Geraet das bei 
bestimmten Patterns nicht richtig flaescht (ist'n Wackelkandidat).

Grusz, Sven-Ola

Am Sonntag 29 Januar 2006 21:43 schrieb Robert Gürgens:

>> So da ich mit der Fehlermeldung nichts anfangen kann und der WRT sonst
>> ohne Probleme läuft poste ich es doch mal hier rein:
>>
>> es geht nun darum:
>>
>> *SQUASHFS error: Unable to read fragment cache block [b33dd] SQUASHFS
>> error: Unable to read page, block b33dd,*
>>
>>
>>
>> Kernel-log:
>>
>> CPU revision is: 00029007 Primary instruction cache 8kB, physically
>> tagged, 2-way, linesize 16 bytes. Primary data cache 4kB, 2-way,
>> linesize 16 bytes. Linux version 2.4.30 (root at pcacer) (gcc version
>> 3.4.4) #1 Do Jan 19 23:25:33 CET 2006 Setting the PFC value as 0x15
>> Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On
>> node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2):
>> 0 pages. Kernel command line: root=/dev/mtdblock2
>> rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd
>> console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Using 100.000 MHz
>> high precision timer. Calibrating delay loop... 199.47 BogoMIPS Memory:
>> 30508k/32768k available (1399k kernel code, 2260k reserved, 96k data,
>> 80k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3,
>> 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384
>> bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer
>> cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash
>> table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait'
>> instruction... unavailable. POSIX conformance testing by UNIFIX PCI:
>> Disabled PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon
>> Swansea University Computer Society NET3.039 Initializing RT netlink
>> socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch
>> (rgooch at atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (C)
>> 2001-2003 Red Hat, Inc. Squashfs 2.1-r2 (released 2004/12/15) (C)
>> 2002-2004 Phillip Lougher pty: 256 Unix98 ptys configured Serial driver
>> version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
>> ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq =
>> 0) is a 16550A b44.c:v0.93 (Mar, 2004) PCI: Setting latency timer of
>> device 00:02.0 to 64 eth0: Broadcom 47xx 10/100BaseT Ethernet
>> 00:14:bf:08:fd:14 Physically mapped flash: Found 1 x16 devices at 0x0 in
>> 16-bit bank Physically mapped flash: Found an alias at 0x800000 for the
>> chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the
>> chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the
>> chip at 0x0 Intel/Sharp Extended Query Table at 0x0031 Using buffer
>> write method cfi_cmdset_0001: Erase suspend on write enabled 0:
>> offset=0x0,size=0x20000,blocks=64 Flash device: 0x800000 at 0x1c000000
>> Creating 5 MTD partitions on "Physically mapped flash":
>> 0x00000000-0x00040000 : "pmon" 0x00040000-0x007e0000 : "linux"
>> 0x000ba8b4-0x0019f000 : "rootfs" mtd: partition "rootfs" doesn't start
>> on an erase block boundary -- force read-only 0x007e0000-0x00800000 :
>> "nvram" 0x001a0000-0x007e0000 : "OpenWrt" Initializing Cryptographic API
>> NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP:
>> routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables
>> configured (established 2048 bind 4096) Linux IP multicast router 0.06
>> plus PIM-SM ip_conntrack version 2.1 (5953 buckets, 5953 max) - 320
>> bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4:
>> Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008
>> for NET4.0 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David
>> S. Miller VFS: Mounted root (squashfs filesystem) readonly. Mounted
>> devfs on /dev Freeing unused kernel memory: 80k freed Algorithmics/MIPS
>> FPU Emulator v1.5 diag boardtype: 00000708 b44: eth0: Link is up at 100
>> Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX.
>> Probing device eth0: found! PCI: Setting latency timer of device 00:01.0
>> to 64 eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.37.0
>> Software Watchdog Timer: 0.05, timer margin: 180 sec device eth0 entered
>> promiscuous mode SQUASHFS error: lzma returned unexpected result 0x1
>> SQUASHFS error: Unable to read fragment cache block [b33dd] SQUASHFS
>> error: Unable to read page, block b33dd, size 32cf br0: port 1(vlan0)
>> entering learning state br0: port 1(vlan0) entering forwarding state
>> br0: topology change detected, propagating
>>
>>
>> Vielleicht kann ja damit jemand was anfangen.
>>
>> Gruß Robert
>  
>

-------------- nächster Teil --------------
_______________________________________________
Berlin mailing list
Berlin at olsrexperiment.de
https://www.olsrexperiment.de/cgi-bin/mailman/listinfo/berlin