[Berlin-wireless] Firmeware flashen per ssh
Mathias Mahnke
mathias
Mi Okt 11 19:27:18 CEST 2006
Robert Gürgens sagte:
> Hi Leute,
>
> kleine Frage zum Flashen per SSH. In der Readme steht:
>
> For updating running Freifunk nodes OTA (over the air), use scp to upload
> a trx file, then reflash using ssh shell for rapid deployment:
> root at pc# scp openwrt-freifunk-1.3-de.trx 10.1.2.3:/tmp (Enter password)
> root at pc# ssh root at 10.1.2.3 (Enter password)
> root at wrt:~# firmware-burn /tmp/openwrt-freifunk-1.3-de.trx
>
>
> Nur leider gibt es firmware-burn nicht. Wäre für Tips dankbar und eine
> Aktualisierung der Readme wäre dann auch sehr nett.
Was auch immer "firmware-burn" ist, das eigentlich Tool heisst "mtd". Im
Zweifel einfach mal mtd eingeben und die Hinweise lesen.
Ich gehe so vor (bitte Doku selbst studieren und eigene Gefahr):
mtd -r -e linux write <image> linux
Ahoi
-mathias
_______________________________________________
Berlin mailing list
Berlin at olsrexperiment.de
https://www.olsrexperiment.de/cgi-bin/mailman/listinfo/berlin
Mehr Informationen über die Mailingliste Berlin