[Berlin-wireless] Problrem flashen nanostation M2 Loco

Ufo ufo
Sa Nov 8 15:39:39 CET 2014


Da bin ich allerdings etwas erstaunt. Mit dem Leipziger Freifunk 
Meshkit, basierend auf dem Openwrt Barrier Breaker Release (von 
http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/ kopiert) gibt 
es zumindest mit der M5loco XW keine Probleme und wir haben in Leipzig 
und in der Altmark schon seit vielen Wochen mehrere Geräte laufen.
Es gibt zwar kein eigenes Image (a la Bullet-m) deshalb flashen wir das 
nanostation-xw Image.
Meshkit siehe http://firmware.leipzig.freifunk.net/

--

BusyBox v1.22.1 (2014-09-20 22:01:35 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

   _______                     ________        __    OLSR
  |       |.-----.-----.-----.|  |  |  |.----.|  |_    +
  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|  bat
  |_______||   __|_____|__|__||________||__|  |____|  man
           |__| W I R E L E S S   F R E E D O M  !!!  adv
        FREIFUNK LEIPZIG http://leipzig.freifunk.net

logread -f                        // syslog Ausgabe auf Konsole
neigh.sh                          // OLSR Nachbarn anzeigen
batctl -m bat12 o                 // batman-adv nachbarn anzeigen
iw dev wlan0 station dump         // WLAN Nachbarn mit Details
traceroute -n 10.61.104.2         // Traceroute via OLSR
batctl -m bat12 tr 10.61.71.1     // Traceroute via batman-adv
ip a s                            // alle IPs anzeigen
ip r s t all                      // gesamte Routingtabelle
===============================================================


root at 110-4:~# cat /tmp/sysinfo/*
nanostation-m-xw
Ubiquiti Nanostation M XW
root at 110-4:~# neigh.sh
Local       Remote      vTime LQ       NLQ      Cost
10.61.110.4 10.59.0.131 38563 0.705000 1.000000 1450

nc: socket(AF_INET6,2,0): Address family not supported by protocol
Failed to parse message data

root at 110-4:~# batctl -m bat12 o
[B.A.T.M.A.N. adv 2014.2.0, MainIF/MAC: wlan0.12/04:18:d6:5a:6e:7f 
(bat12 BATMAN_IV)]
   Originator      last-seen (#/255)           Nexthop [outgoingIF]:   
Potential nexthops ...
64:66:b3:4f:fa:bc    0.380s   (250) 64:66:b3:4f:fa:bc [  wlan0.12]: 
64:66:b3:4f:fa:bc (250)
64:66:b3:4f:fa:bb    0.010s   (250) 64:66:b3:4f:fa:bc [  wlan0.12]: 
64:66:b3:4f:fa:bc (250)
root at 110-4:~# uname -a
Linux 110-4 3.10.49 #3 Wed Oct 1 14:00:51 CEST 2014 mips GNU/Linux
root at 110-4:~#


Am 08.11.2014 um 14:24 schrieb cholin:
> Hallo Falk,
>
> du scheinst wohl eine neue Nanostation M2 Loco XW zu haben (Unterschied
> ist hier der Zusatz XW - wird seit 2014 produziert). Diese wird zzt
> weder von uns in der stabilen Firmware-Version (dort gibts bisher nur
> Support für Nanostation M2/M5 XW - keine Loco), noch von den Lübeckern
> unterstützt. Hierzu gibt es auch ein Issue auf github [1]. Du kannst die
> Originalfirmware über tftp [2] wiederherstellen.
>
> Gruß
> Nico
>
> [1] https://github.com/freifunk-berlin/firmware/issues/26
> [2] http://wiki.ubnt.com/Firmware_Recovery
>
> Am 08.11.2014 um 14:17 schrieb Falk Röder:
>> Hallo liebe Freifunker,
>>
>> ich möchte bei meiner Freundin gern ein Freifunk einrichten, da das Netz im Haus
>> sehr bescheiden ist.
>>
>> Leider ist die Nanostation nach dem flashen schon mit der Erstinstallation nicht
>> mehr erreichbar. Ich habe mehrfach versucht sie über das Webinterface und über
>> ftp zu flashen. Dabei habe ich eure Firmware und die Lübecker verwendet. Die
>> Nanostation kann ich nicht einmal mehr anpingen, verbunden bin ich angeblich
>> aber dennoch.
>>
>> Um wieder auf die Nanostation zu kommen muss ich die Original Firmware einspielen.
>>
>> kann mir jemand helfen bitte?
>>
>> Beste Grüße, Falk
>>
>>
>> -- 
>> - no title specified
>> <http://www.falk-roeder.de>
>>
>> Kienhorststraße 107 | 13403 Berlin
>>
>> 0157 / 39 574 028 | www.falk-roeder.de
>>
>> -----------------------------------------------------------------------------------------------------------------
>>
>> Disclaimer:
>>
>> This email and any attachments to it are confidential. It is intended
>> solely for the use of the individual or entity to whom it is addressed
>> and others authorized to receive it. If you are not the intended
>> recipient of this e-mail or any parts of it please contact the sender
>> by reply e-mail and destroy all copies of the original message. No
>> other person or third party is authorized to copy, forward, disclose,
>> distribute or retain this e-mail in any form.
>>
>> -----------------------------------------------------------------------------------------------------------------
>>
>> <http://www.der-postillon.com/2013/09/erst-denken-dann-drucken-warnhinweise.html>
>>
>>
>>
>>
>> _______________________________________________
>> Berlin mailing list
>> Berlin at berlin.freifunk.net
>> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
>>
>
>
>
> _______________________________________________
> Berlin mailing list
> Berlin at berlin.freifunk.net
> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin

-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://lists.berlin.freifunk.net/pipermail/berlin/attachments/20141108/60def564/attachment.html>



Mehr Informationen über die Mailingliste Berlin