[Berlin-wireless] icvpn02, vpn03b und vpn03c gleichzeitg nicht erreichbar
Bastian
fly at d00m.org
Fr Okt 21 23:21:57 CEST 2016
Hallo,
auf l105-hyp1 aka host-ipb, der Hypervisor, welcher die VMs bgp02,
icvpn02, vpn03b und vpn03c hostet, scheint gerade die SSD auszufallen.
Siehe smartctl output im Anhang.
Es gibt wohl ein paar Löcher in der SSD und deswegen hat es u.a. auch
bgp02 zerlegt. Leider hab ich das erst zu spät gemerkt und da war der
reboot der VM schon abgesetzt. Hochgekommen ist sie leider nicht mehr...
Ich hab auf die schnelle jetzt bird auf dem Hypervisor installiert und
minimal konfiguriert. Minimal bedeutet hier suboptimales Routing weil
nicht alle Peerings aktiv sind und fuer IPv6 hab ich noch gar nix gemacht.
icvpn02, vpn03b und vpn03c sowie deren NAT-subnets sollten aber erstmal
wieder erreichbar sein.
Ich werd mich die Tage noch mit Updates melden.
Cheers, Bastian
On 10/21/2016 09:36 PM, Marlen Caemmerer wrote:
> Hallo,
>
> die 3 Rechner sind in der Tat seit ca. 18:20 nicht erreichbar.
> Kann bitte mal einer gucken?
>
> Viele Grüße
> nosy
-------------- nächster Teil --------------
# smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TK0120GDJXT
Serial Number: BTWL34320EZY120LGN
LU WWN Device Id: 5 5cd2e4 04b500c08
Firmware Version: 4IWBHPG0
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 21 23:11:01 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 113603762
5 Reallocated_Sector_Ct 0x0033 001 001 001 Pre-fail Always FAILING_NOW 2042
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18067
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 43
171 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 2712
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0033 095 095 001 Pre-fail Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 34
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 459660395132
180 Unused_Rsvd_Blk_Cnt_Tot 0x003b 130 130 039 Pre-fail Always - 3967437882
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 077 074 000 Old_age Always - 23 (Min/Max 19/26)
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 23
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 461310
196 Reallocated_Event_Count 0x0033 017 017 010 Pre-fail Always - 2042
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 656
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 2
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 142626
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 473 bytes
Beschreibung: OpenPGP digital signature
URL : <https://lists.berlin.freifunk.net/pipermail/berlin/attachments/20161021/9d107ded/attachment.sig>
Mehr Informationen über die Mailingliste Berlin