[Berlin-wireless]  Re: Schlechte Performance beim Gateway Auswahl - Hilfe benötigt

Nick nick at systemli.org
Do Okt 28 14:16:29 CEST 2021


Jo dann heißt das so. :)

On 10/28/21 12:37, Dragan Noveski wrote:
> Hallo Nick, vielen Dank für deine Antwort.
>
> Nur denke ich, daß meine Firmware keine "Falter" ist. Wie gesagt, von 
> etwa April letzten Jahres.
>
> Im /etc/config ist das file "freifunk-policyrouting". Ist das damit 
> gemeint?
>
> LG,
>
> Dragan
> Am 28.10.2021, 11:08 schrieb Nick <nick at systemli.org>:
>
>     Mach bitte olsr smartgateway aus und alle deine Probleme sind
>     glaube ich
>     gelöst. :)
>
>     Ersetz einfach den Block in /etc/config/olsrd  mit dem:
>     config olsrd
>         option IpVersion '4'
>         option FIBMetric 'flat'
>         option AllowNoInt 'yes'
>         option TcRedundancy '2'
>         option NatThreshold '0.75'
>         option LinkQualityAlgorithm 'etx_ff'
>         option SmartGateway 'no'
>         option SmartGatewayThreshold '50'
>         option Pollrate '0.025'
>         option SmartGatewaySpeed '45000 200000'
>         option SmartGatewayUplink 'both'
>         option LinkQualityLevel '2'
>         option OlsrPort '698'
>         option Willingness '3'
>         option TosValue '16'
>
>     Dann bitte noch:
>     opkg remove falter-policyrouting
>
>     Nen reboot und hoffentlich sollte es dann gehen. Das ding das
>     policyrotuing weg muss, kommt aus meiner Erfahrung mit unreachable
>     rules. Das einfach nicht getestet und nur jetzt eine Behauptung
>     das es
>     funktionieren wird. ;)
>
>     VG
>     Nick
>
>     On 10/27/21 22:00, Dragan Noveski wrote:
>     > Hallo an die Liste,
>     > ich benutze ein TP-Link CPE210v3 hier, Hedy von ca. 04/20.
>     > Der verbindet sich über mehrere Hops mit einem Gateway. in der
>     letzten
>     > Zeit ist für mich die Internetanbindung sehr schlecht. Jetzt ist
>     mir
>     > folgendes aufgefallen.
>     > Hier zu erst der output einer SSH-Console, bin mit menem Rehner
>     über
>     > WiFi mit dem Router verbunden:
>     > root at murija9:/home/afadoc# ssh root at 10.36.241.225
>     > root at 10.36.241.225's password:
>     >
>     > .......
>     > root at AP3:~# traceroute -n 8.8.8.8
>     > traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 38 byte packets
>     >  1  10.31.34.184  48.644 ms  129.556 ms  7.275 ms
>     >  2  10.31.10.17  281.433 ms  6.025 ms  8.779 ms
>     >  3  10.31.7.149  28.216 ms  43.015 ms  923.022 ms
>     >  4  10.31.2.1  330.413 ms  46.506 ms  115.165 ms
>     >  5  62.156.244.47  125.660 ms  193.932 ms  123.835 ms
>     >  6  62.156.247.154  215.934 ms  53.479 ms  76.857 ms
>     >  7  217.5.74.6  242.462 ms  62.154.32.58  137.460 ms 217.0.203.146
>     > 80.189 ms
>     >  8  72.14.202.10  87.711 ms  120.418 ms  58.106 ms
>     >  9  10.252.44.158  49.316 ms  10.252.165.190  98.151 ms
>     10.252.213.30
>     > 101.047 ms
>     > 10  8.8.8.8  706.356 ms  215.120 ms  168.103 ms
>     > root at AP3:~#
>     >
>     > ----
>     > Jetzt der output der Console vom meinem Rechner, als Client von dem
>     > Router:
>     > afadoc at murija9:~$ traceroute -n 8.8.8.8
>     > traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
>     >  1  10.36.241.225  14.328 ms  15.889 ms  21.394 ms
>     >  2  10.31.11.101  132.402 ms  132.724 ms  136.951 ms
>     >  3  176.74.57.18  168.912 ms  140.564 ms  191.624 ms
>     >  4  109.68.226.34  218.383 ms  219.254 ms 77.247.82.163 186.471 ms
>     >  5  176.74.57.39  344.740 ms  344.237 ms 109.68.226.26 339.045 ms
>     >  6  37.44.7.252  389.678 ms  379.813 ms 185.56.105.20 342.301 ms
>     >  7  37.49.155.39  383.468 ms  272.699 ms  272.682 ms
>     >  8  108.170.251.129  106.469 ms * 108.170.251.193 264.005 ms
>     >  9  185.56.105.20  322.378 ms  322.110 ms  291.604 ms
>     > 10  37.49.155.39  293.055 ms 8.8.8.8  270.044 ms 37.49.155.39 
>     173.144 ms
>     > afadoc at murija9:~$
>     > ----
>     > Wie es für mich aussieht, zeigt der Router einen anderen Gateway
>     als
>     > der Client? Vielmehr, der Gateway 10.31.2.1 wird in dem
>     Web-Interface
>     > ->SmartGatewayAnnouncement Liste gar nicht angezeigt. Das ist so
>     nicht
>     > okay, oder?
>     > Gibt es ein Consolen Befehl, mit dem sich die
>     SmartGatewayAnouncement
>     > liste anzeigen lassen kann? Dann könnte ich es hier posten.
>     > Ich hoffe, dass irgendjemand mein Dilemma versteht, und einen
>     > Vorschlag machen kann, wie ich weiter vorgehen sollte.
>     > LG,
>     > Dragan
>     >
>     > _______________________________________________
>     > Berlin mailing list
>     > Berlin at berlin.freifunk.net
>     > http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
>     > Diese Mailingliste besitzt ein �ffentlich einsehbares Archiv
>
>     _______________________________________________
>     Berlin mailing list
>     Berlin at berlin.freifunk.net
>     http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
>     Diese Mailingliste besitzt ein ffentlich einsehbares Archiv 
>
>
> _______________________________________________
> Berlin mailing list
> Berlin at berlin.freifunk.net
> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
> Diese Mailingliste besitzt ein �ffentlich einsehbares Archiv



Mehr Informationen über die Mailingliste Berlin