[Berlin-wireless] SE505 hat eth1 vergessen (bootscreen inside)

Di Mai 19 13:58:00 CEST 2009

hallo,

habe mein SE505 inzwischen mit jatag bearbeitet mit dem erfolg das er
eth1 etc nicht mehr findet. kann mir jemand sagen an was das haengt?
Hoffe das der bootvorgang ausreichend anhaltspunkte liefert.

reboot<\r><\n>
root at Freifunk:/# <\r>The system is going down NOW !!<\r><\n>
<\r>Sending SIGTERM to all processes.<\r><\n>
<\r>Sending SIGKILL to all processes.<\r><\n>
<\r>Please stand by while rebooting the system.<\r><\n>
Decompressing(gunzip)...........done<\r><\n>
<\r><\n>
Here we try to capture the default reset button: Not Pressed<\r><\n>
<\r><\n>
<\r><\n>
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)<\r><\n>
Build Date: Fr Feb 23 20:55:54 CET 2007 (funnel at cyriax)<\r><\n>
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.<\r><\n>
<\r><\n>
Initializing Arena.<\r><\n>
Initializing Devices.<\r><\n>
CPU type 0x29007: 192MHz<\r><\n>
Total memory: 0x4000000 bytes (64MB)<\r><\n>
<\r><\n>
Total memory used by CFE:  0x80300000 - 0x8043CE00 (1297920)<\r><\n>
Initialized Data:          0x80335B20 - 0x80339630 (15120)<\r><\n>
BSS Area:                  0x80339630 - 0x8033AE00 (6096)<\r><\n>
Local Heap:                0x8033AE00 - 0x8043AE00 (1048576)<\r><\n>
Stack Area:                0x8043AE00 - 0x8043CE00 (8192)<\r><\n>
Text (code) segment:       0x80300000 - 0x80335B20 (219936)<\r><\n>
Boot area (physical):      0x0043D000 - 0x0047D000<\r><\n>
Relocation Factor:         I:00000000 - D:00000000<\r><\n>
<\r><\n>
Reading :: Failed.: Error<\r><\n>
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)<\r><\n>
Loading: .. 3704 bytes read<\r><\n>
Entry at 0x80001000<\r><\n>
Starting program at 0x80001000<\r><\n>
Creating 5 MTD partitions on "Physically mapped flash":<\n>
<\r>0x00000000-0x00040000 : "cfe"<\n>
<\r>0x00040000-0x003f0000 : "linux"<\n>
<\r>0x000b61a0-0x00180000 : "rootfs"<\n>
<\r>mtd: partition "rootfs" doesn't start on an erase block boundary --
force read-only<\n>
<\r>0x003f0000-0x00400000 : "nvram"<\n>
<\r>0x00180000-0x003f0000 : "OpenWrt"<\n>
<\r>Using /lib/modules/2.4.30/ff-diag.o<\r><\n>
diag boardtype: 00000000<\n>
<\r>diag se505-v2 detected<\n>
<\r>Using /lib/modules/2.4.30/switch-core.o<\r><\n>
Using /lib/modules/2.4.30/switch-robo.o<\r><\n>
Probing device eth0: No Robo switch in managed mode found<\n>
<\r>Probing device eth1: No such device<\n>
<\r>Probing device eth2: No such device<\n>
<\r>Probing device eth3: No such device<\n>
<\r>insmod: init_module: switch-robo: No such device<\r><\n>
Using /lib/modules/2.4.30/switch-adm.o<\r><\n>
BFL_ENETADM not set in boardflags. Use force=1 to ignore.<\n>
<\r>insmod: init_module: switch-adm: No such device<\r><\n>
Unlocking mtd4<\r><\n>
<\r>init started:  BusyBox v1.01 (2008.11.10-07:04+0000) multi-call
binary<\r><\n>
kernel.panic = 3<\r><\n>
vm.pagetable_cache = 0 0<\r><\n>
net.ipv4.conf.all.arp_ignore = 1<\r><\n>
net.ipv4.conf.all.send_redirects = 0<\r><\n>
net.ipv4.conf.default.arp_ignore = 1<\r><\n>
net.ipv4.conf.default.send_redirects = 0<\r><\n>
net.ipv4.icmp_echo_ignore_broadcasts = 1<\r><\n>
net.ipv4.icmp_ignore_bogus_error_responses = 1<\r><\n>
net.ipv4.ip_conntrack_max = 8192<\r><\n>
net.ipv4.ip_forward = 1<\r><\n>
net.ipv4.netfilter.ip_conntrack_tcp_timeout_established = 7200<\r><\n>
net.ipv4.tcp_fin_timeout = 30<\r><\n>
net.ipv4.tcp_frto = 1<\r><\n>
net.ipv4.tcp_keepalive_time = 120<\r><\n>
net.ipv4.tcp_syncookies = 1<\r><\n>
net.ipv4.tcp_timestamps = 0<\r><\n>
net.ipv4.tcp_westwood = 1<\r><\n>
Using /lib/modules/2.4.30/wl.o<\r><\n>
Warning: loading wl will taint the kernel: no license<\r><\n>
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules<\r><\n>
eth%d: 3.90.37.0 driver failed with code 15<\n>
<\r>insmod: init_module: wl: No such device<\r><\n>
Using /lib/modules/2.4.30/crondog.o<\r><\n>
CRONDOG: Timer margin: 600 sec<\n>
<\r>Using /lib/modules/2.4.30/wlcompat.o<\r><\n>
No Broadcom devices found.<\n>
<\r>insmod: init_module: wlcompat: No such device<\r><\n>
# vlan0 ignored: can't find/create<\r><\n>
# eth1 ignored: can't find/create<\r><\n>
# eth2 ignored: can't find/create<\r><\n>
SIOCSIFHWADDR: Operation not supported<\r><\n>
Broadcast can be set only for IPv4 addresses<\r><\n>
# vlan1 ignored: can't find/create<\r><\n>
#  ignored: can't find/create<\r><\n>
Configure resolv...<\r><\n>
error, Failure parsing line 1 of /etc/udhcpd.conf<\r><\n>
error, Failure parsing line 2 of /etc/udhcpd.conf<\r><\n>
error, Failure parsing line 4 of /etc/udhcpd.conf<\r><\n>
error, Failure parsing line 5 of /etc/udhcpd.conf<\r><\n>
info, udhcpd (v0.9.9-pre) started<\r><\n>
error, SIOCGIFADDR failed, is the interface up and configured?: Cannot
assign requested address<\r><\n>
Mon Dec 31 12:00:00 UTC 2007<\r><\n>
Starting olsr prio...<\r><\n>
sed: /etc/olsrd.conf: No such file or directory<\r><\n>
<\r><\n>
Please press Enter to activate this console. <\r><\n>
<\r><\n>
<\r><\n>
BusyBox v1.01 (2008.11.10-07:04+0000) Built-in shell (ash)<\r><\n>
Enter 'help' for a list of built-in commands.<\r><\n>
<\r><\n>
  _______                     ________        __<\r><\n>
 (       ).-----.-----.-----.)  )  )  ).----.)  )<\r><\n>
 (   -   ))  _  )  -__)     ))  )  )  ))   _))   _)<\r><\n>
 (_______))   __)_____)__)__))________))__)  )____)<\r><\n>
          )__) F R E I F U N K  F I R M W A R E<\r><\n>
<\r><\n>
root at Freifunk:/# ifconfig<\r><\n>
[Install freifunk-openwrt-compat for /sbin/ifconfig]<\r><\n>
+ exec ip addr<\r><\n>
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue <\r><\n>
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<\r><\n>
    inet 127.0.0.1/8 scope host lo<\r><\n>
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen
1000<\r><\n>
    link/ether 00:01:e3:47:17:e2 brd ff:ff:ff:ff:ff:ff<\r><\n>
3: br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue <\r><\n>
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff<\r><\n>
root at Freifunk:/#