[Berlin-wireless] [solved] SE505 hat eth1 vergessen (bootscreen inside)
Fabian Schonack
freifunk
Di Mai 19 14:42:12 CEST 2009
nochmal original cfe und original nvram drauf und dann wieder neues cfe
bin probiert und nun gehts...
schoenen sonnigen noch :-)
cu
Fabian Schonack wrote:
> hallo,
>
> habe mein SE505 inzwischen mit jatag bearbeitet mit dem erfolg das er
> eth1 etc nicht mehr findet. kann mir jemand sagen an was das haengt?
> Hoffe das der bootvorgang ausreichend anhaltspunkte liefert.
>
> reboot<\r><\n>
> root at Freifunk:/# <\r>The system is going down NOW !!<\r><\n>
> <\r>Sending SIGTERM to all processes.<\r><\n>
> <\r>Sending SIGKILL to all processes.<\r><\n>
> <\r>Please stand by while rebooting the system.<\r><\n>
> Decompressing(gunzip)...........done<\r><\n>
> <\r><\n>
> Here we try to capture the default reset button: Not Pressed<\r><\n>
> <\r><\n>
> <\r><\n>
> CFE version 1.0.37 for BCM947XX (32bit,SP,LE)<\r><\n>
> Build Date: Fr Feb 23 20:55:54 CET 2007 (funnel at cyriax)<\r><\n>
> Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.<\r><\n>
> <\r><\n>
> Initializing Arena.<\r><\n>
> Initializing Devices.<\r><\n>
> CPU type 0x29007: 192MHz<\r><\n>
> Total memory: 0x4000000 bytes (64MB)<\r><\n>
> <\r><\n>
> Total memory used by CFE: 0x80300000 - 0x8043CE00 (1297920)<\r><\n>
> Initialized Data: 0x80335B20 - 0x80339630 (15120)<\r><\n>
> BSS Area: 0x80339630 - 0x8033AE00 (6096)<\r><\n>
> Local Heap: 0x8033AE00 - 0x8043AE00 (1048576)<\r><\n>
> Stack Area: 0x8043AE00 - 0x8043CE00 (8192)<\r><\n>
> Text (code) segment: 0x80300000 - 0x80335B20 (219936)<\r><\n>
> Boot area (physical): 0x0043D000 - 0x0047D000<\r><\n>
> Relocation Factor: I:00000000 - D:00000000<\r><\n>
> <\r><\n>
> Reading :: Failed.: Error<\r><\n>
> Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)<\r><\n>
> Loading: .. 3704 bytes read<\r><\n>
> Entry at 0x80001000<\r><\n>
> Starting program at 0x80001000<\r><\n>
> Creating 5 MTD partitions on "Physically mapped flash":<\n>
> <\r>0x00000000-0x00040000 : "cfe"<\n>
> <\r>0x00040000-0x003f0000 : "linux"<\n>
> <\r>0x000b61a0-0x00180000 : "rootfs"<\n>
> <\r>mtd: partition "rootfs" doesn't start on an erase block boundary --
> force read-only<\n>
> <\r>0x003f0000-0x00400000 : "nvram"<\n>
> <\r>0x00180000-0x003f0000 : "OpenWrt"<\n>
> <\r>Using /lib/modules/2.4.30/ff-diag.o<\r><\n>
> diag boardtype: 00000000<\n>
> <\r>diag se505-v2 detected<\n>
> <\r>Using /lib/modules/2.4.30/switch-core.o<\r><\n>
> Using /lib/modules/2.4.30/switch-robo.o<\r><\n>
> Probing device eth0: No Robo switch in managed mode found<\n>
> <\r>Probing device eth1: No such device<\n>
> <\r>Probing device eth2: No such device<\n>
> <\r>Probing device eth3: No such device<\n>
> <\r>insmod: init_module: switch-robo: No such device<\r><\n>
> Using /lib/modules/2.4.30/switch-adm.o<\r><\n>
> BFL_ENETADM not set in boardflags. Use force=1 to ignore.<\n>
> <\r>insmod: init_module: switch-adm: No such device<\r><\n>
> Unlocking mtd4<\r><\n>
> <\r>init started: BusyBox v1.01 (2008.11.10-07:04+0000) multi-call
> binary<\r><\n>
> kernel.panic = 3<\r><\n>
> vm.pagetable_cache = 0 0<\r><\n>
> net.ipv4.conf.all.arp_ignore = 1<\r><\n>
> net.ipv4.conf.all.send_redirects = 0<\r><\n>
> net.ipv4.conf.default.arp_ignore = 1<\r><\n>
> net.ipv4.conf.default.send_redirects = 0<\r><\n>
> net.ipv4.icmp_echo_ignore_broadcasts = 1<\r><\n>
> net.ipv4.icmp_ignore_bogus_error_responses = 1<\r><\n>
> net.ipv4.ip_conntrack_max = 8192<\r><\n>
> net.ipv4.ip_forward = 1<\r><\n>
> net.ipv4.netfilter.ip_conntrack_tcp_timeout_established = 7200<\r><\n>
> net.ipv4.tcp_fin_timeout = 30<\r><\n>
> net.ipv4.tcp_frto = 1<\r><\n>
> net.ipv4.tcp_keepalive_time = 120<\r><\n>
> net.ipv4.tcp_syncookies = 1<\r><\n>
> net.ipv4.tcp_timestamps = 0<\r><\n>
> net.ipv4.tcp_westwood = 1<\r><\n>
> Using /lib/modules/2.4.30/wl.o<\r><\n>
> Warning: loading wl will taint the kernel: no license<\r><\n>
> See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules<\r><\n>
> eth%d: 3.90.37.0 driver failed with code 15<\n>
> <\r>insmod: init_module: wl: No such device<\r><\n>
> Using /lib/modules/2.4.30/crondog.o<\r><\n>
> CRONDOG: Timer margin: 600 sec<\n>
> <\r>Using /lib/modules/2.4.30/wlcompat.o<\r><\n>
> No Broadcom devices found.<\n>
> <\r>insmod: init_module: wlcompat: No such device<\r><\n>
> # vlan0 ignored: can't find/create<\r><\n>
> # eth1 ignored: can't find/create<\r><\n>
> # eth2 ignored: can't find/create<\r><\n>
> SIOCSIFHWADDR: Operation not supported<\r><\n>
> Broadcast can be set only for IPv4 addresses<\r><\n>
> # vlan1 ignored: can't find/create<\r><\n>
> # ignored: can't find/create<\r><\n>
> Configure resolv...<\r><\n>
> error, Failure parsing line 1 of /etc/udhcpd.conf<\r><\n>
> error, Failure parsing line 2 of /etc/udhcpd.conf<\r><\n>
> error, Failure parsing line 4 of /etc/udhcpd.conf<\r><\n>
> error, Failure parsing line 5 of /etc/udhcpd.conf<\r><\n>
> info, udhcpd (v0.9.9-pre) started<\r><\n>
> error, SIOCGIFADDR failed, is the interface up and configured?: Cannot
> assign requested address<\r><\n>
> Mon Dec 31 12:00:00 UTC 2007<\r><\n>
> Starting olsr prio...<\r><\n>
> sed: /etc/olsrd.conf: No such file or directory<\r><\n>
> <\r><\n>
> Please press Enter to activate this console. <\r><\n>
> <\r><\n>
> <\r><\n>
> BusyBox v1.01 (2008.11.10-07:04+0000) Built-in shell (ash)<\r><\n>
> Enter 'help' for a list of built-in commands.<\r><\n>
> <\r><\n>
> _______ ________ __<\r><\n>
> ( ).-----.-----.-----.) ) ) ).----.) )<\r><\n>
> ( - )) _ ) -__) )) ) ) )) _)) _)<\r><\n>
> (_______)) __)_____)__)__))________))__) )____)<\r><\n>
> )__) F R E I F U N K F I R M W A R E<\r><\n>
> <\r><\n>
> root at Freifunk:/# ifconfig<\r><\n>
> [Install freifunk-openwrt-compat for /sbin/ifconfig]<\r><\n>
> + exec ip addr<\r><\n>
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue <\r><\n>
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<\r><\n>
> inet 127.0.0.1/8 scope host lo<\r><\n>
> 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen
> 1000<\r><\n>
> link/ether 00:01:e3:47:17:e2 brd ff:ff:ff:ff:ff:ff<\r><\n>
> 3: br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue <\r><\n>
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff<\r><\n>
> root at Freifunk:/#
>
> _______________________________________________
> Berlin mailing list
> Berlin at berlin.freifunk.net
> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
Mehr Informationen über die Mailingliste Berlin