[Berlin-wireless] Firmware Version 1.4.1 - WLAN nicht assoziiert
Perry
isprotejesvalkata at gmail.com
So Aug 16 14:17:24 CEST 2026
Hallo zusammen,
Der felher haben wir behoben indem das der kanal nicht auf "auto"
sondern wie bei der standart Freifunk setup auf kanäle 13 und 36
eingerictet ist.
Gruß
Perry
On 16/08/2026 12:10 pm, Mario Siegmann via Berlin wrote:
> Hallo zusammen,
> seit dem Upgrade auf die neue Version bekomme ich für mein eigenes WLAN
> die Fehlermeldung "WLAN ist nicht assoziiert"
>
> In der alten Version hat es funktioniert.
> Was muss ich machen?
>
> Hier die Einstellungen:
>
>
> Vielen Dank im Voraus.
>
> ---
> Mit freundlichen Grüßen
>
> Mario Siegmann
>
>
> Am 16.08.2026 um 10:07 schrieb Perry:
>>
>> For english, scroll down...
>>
>> ---
>>
>> Liebe Freifunk-Community,
>>
>> wir freuen uns, die neueste Version der Freifunk-Berlin Falter-
>> Firmware (Version 1.4.1) bekannt zu geben.
>>
>> *Release Notes*
>>
>> Bitte vorher auch die "Bekannte Probleme" lesen.
>>
>> *Änderungen*
>>
>> * Basiert auf OpenWrt-23.05
>> * fixes für konfigurations änderungen
>> * Verbesserung des autoupdate script
>> * LuCI fixes und verbesserungen
>> * Neue version des openwifimap script
>> * updates für die Build Umgebung
>>
>>
>> *Bekannte Probleme*
>> *DSA*
>>
>> In OpenWrt hat sich geändert wie viele Router die physischen
>> Anschlüsse auf der Rückseite ansteuern.
>> Infolgedessen ist die Konfiguration nicht mit der neuen Version
>> kompatibel.
>> Das bedeutet, dass der Router nur aktualisiert werden kann indem er
>> komplett neu konfiguriert wird.
>> Der Autoupdater führt in dieser Version kein Upgrade für Router durch,
>> bei denen auf DSA umgestellt wurde.
>> Wenn die Firmware über die Weboberfläche aktualisiert wird, werden die
>> änderungen genau erklärt.
>> Eine technischere Erklärung gibt es im OpenWRT Wiki: https://
>> openwrt.org/docs/guide-user/network/dsa/dsa-mini-tutorial
>>
>> *Nicht jeder Router ist hier von betroffen. Es hängt vom model und der
>> Verwendeten OpenWRT Version ab*
>>
>> Wenn der Router nach DSA migriert wird, wird folgende Nachricht im
>> Webinterface gezeigt.
>>
>> <img width="580" height="130" alt="image" src="https://github.com/
>> user-attachments/assets/7d052977-0d43-43ac-80f6-2af4e06e4023" />
>>
>> Um router die auf DSA migrieren zu aktualisieren, folge diese schritte:
>>
>> * Stelle sicher dass du die IP Adressen die zum einrichten verwendet
>> wurden gespeichert hast. Du kannst diese dir auf folgender Seite
>> zusenden lassen: https://config.berlin.freifunk.net/summary
>> * Lade dir das aktuelle image vom Firmware Selector herunter:
>> https://selector.berlin.freifunk.net/ Pass auf dass du das
>> richtige Model aussuchst um nicht deinen router zu bricken.
>> * Speicher die aktuelle Router konfiguration. Dies ist hilfreich
>> sollte es zu problemen bei dem update kommen. Gehe hierzu im
>> Webinterface auf "System->Backup / Flash Firmware". Hier kannst du
>> unter "Download backup" => "Generate archive" Das backup
>> herunterladen. Auf der kommandozeile ist dass kommando: sysupgrade
>> -b /tmp/backup.tar.gz. Speichere die /tmp/backup.tar.gz Auf deinem
>> Computer
>> * Flashe das neue Image. Im Webinterface geht dies auf der Selben
>> seite auf der du das Backup erstellt hast. Der Button hierfür ist
>> "Flash image...". Als nächstes wähle das neue Image aus. Sollte
>> keine warnung kommen ist dein router nicht von der DSA Migration
>> betroffen und du kannst einfach weitermachen. Sollte der Router
>> betroffen sein siehst du die warnung. Entferne den haken bei "Keep
>> settings and retain the current configuration". Und füge den haken
>> bei "Force upgrade" hinzu. Auf der kommandozeile musst du dass
>> image unter /tmp speichern und dann mittels sysupgrade --force -
>> n /tmp/image.bin flashen.
>> <img width="300" height="283" alt="image" align="center"
>> src="https://github.com/user-attachments/
>> assets/8cba9844-006b-479b-a969-ceffbe889482" />Nachdem der router
>> neustartet musst du den setup wizard nochmals durchlaufen. Dieser
>> ist unter https://frei.funk/ oder https://192.168.42.1/ verfügbar,
>> wenn du dich mit dem Wlan verbindest.
>>
>>
>> *Links*
>>
>> * Openwrt 23.05 Release Notes: https://openwrt.org/releases/23.05/start
>> * Komplettes Changelog: v1.4.0...v1.4.1 https://github.com/freifunk-
>> berlin/falter-packages/compare/v1.4.0...v1.4.1
>>
>>
>> Freudiges Freifunken
>>
>> ----------
>>
>> Dear Freifunk-Community,
>>
>> We are proud to announce the latest release of the Freifunk-Berlin
>> Falter firmware (version 1.4.1).
>>
>> *
>> *
>>
>> *Release Notes*
>>
>> Make sure to read the "Known Issues"
>>
>> *Noteworthy Changes Since falter 1.3.1 and 1.4.0*
>>
>> * Based on OpenWrt-23.05
>> * migration changes and fixes
>> * improvements to autoupdate script
>> * LuCI fixes and improvements
>> * new version of the open wifi map script
>> * updates to the build environment
>>
>>
>> *Known Issues*
>> *DSA*
>>
>> In upstream OpenWrt, many routers have changed their core architecture
>> controlling physical ports on the back of the router. As a result, the
>> configuration of the old system is not compatible with the new system.
>> This means that unless the router is reconfigured from the beginning
>> again, it will not work and be bricked. The autoupdater will not
>> upgrade any router which has changed to DSA in this release. Upgrading
>> the firmware from the web interface will also give you a clear message
>> about the changes. For more technical information, see https://
>> openwrt.org/docs/guide-user/network/dsa/dsa-mini-tutorial
>>
>> *Not all routers are affected in this release. Many more will be
>> affected with the upcoming releases, just like with OpenWrt.*
>>
>> If you have a router which has switched to DSA, you will see this when
>> performing an upgrade in the web interface.
>>
>> <img width="580" height="130" alt="image" src="https://github.com/
>> user-attachments/assets/7d052977-0d43-43ac-80f6-2af4e06e4023" />
>>
>> To upgrade a router which has moved to the DSA architecture, follow
>> these steps.
>>
>> * Make sure you have your original IP addresses which you originally
>> used to set up your router. It is possible to have them resent to
>> your email address by filling out the form at https://
>> config.berlin.freifunk.net/summary
>> * Download the current image from the firmware selector at https://
>> selector.berlin.freifunk.net/ making sure you select the correct
>> model and version. Choosing the wrong image can brick your router.
>> * Save the router's configuration. In case you have any problems,
>> having a backup of your old configuration is helpful if you need
>> help from the community after flashing the image. To do this in
>> the web interface, go to "System->Backup / Flash Firmware". There
>> you should "Download backup" by clicking on the button "Generate
>> archive". On the command line, it's
>> sysupgrade -b /tmp/backup.tar.gz
>> Save /tmp/backup.tar.gz to your computer.
>> * Flash the new image. In the web interface, flashing an image is on
>> the same page as where you saved your backup file. The button is
>> "Flash image...". Next, upload the firmware image. If you do not
>> see the warning, your router is not affected and you can continue
>> flashing. If you router is affected, you will see the warning
>> above. Uncheck the box "Keep settings and retain the current
>> configuration". Then check the box "Force upgrade". On the command
>> line, you need to transfer the firmware image to the /tmp folder
>> on your router and do
>> sysupgrade --force -n /tmp/image.bin
>> <img width="300" height="283" alt="image" align="center"
>> src="https://github.com/user-attachments/
>> assets/8cba9844-006b-479b-a969-ceffbe889482" />After the router
>> reboots, you will have to run the setup wizard again. There will
>> be a setup wireless network you can connect with, or you can
>> connect a cable to the router directly. The wizard can be found at
>> https://frei.funk/ or https://192.168.42.1/
>>
>>
>> *See Also*
>>
>> * Openwrt 23.05 Release Notes: https://openwrt.org/releases/23.05/start
>> * Full Changelog: v1.4.0...v1.4.1 https://github.com/freifunk-
>> berlin/falter-packages/compare/v1.4.0...v1.4.1
>>
>>
>> Happy Freifunken
>>
>>
>> _______________________________________________
>> Berlin mailing list
>> Berlin at berlin.freifunk.net
>> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
>> Diese Mailingliste besitzt ein �ffentlich einsehbares Archiv
>
>
> _______________________________________________
> Berlin mailing list
> Berlin at berlin.freifunk.net
> http://lists.berlin.freifunk.net/cgi-bin/mailman/listinfo/berlin
> Diese Mailingliste besitzt ein �ffentlich einsehbares Archiv
Mehr Informationen über die Mailingliste Berlin